Hantek 6022BE 2.5 The Trigger System Click “ Trigger ” in main menu. Mode : Sets the trigger mode to Edge trigger Sweep : Selects the trigger sweep mode to AUTO , NORMAL or SINGLE Source : Selects the trigger source to CH1, CH2. Slope : Selects the edge trigger slope to Positive or Negative slope The user can drag the trigger icon to adjust the trigger level and the trigger level will be displayed on the top right corner. 2.6 Input Connectors CH 1/CH 2 : Input connectors for waveform display. GND. : a ground terminal USB PORT : Connect the B-Type Plug of USB cable to this port. CAL. : Probe compensation output. User’s Manual 22