Connecting the Display Module Plug the cable connector (provided with the direct connection display module) securely into the printer’s display module connector until it clicks. CAUTION: Be sure not to connect this cable to the drawer kick-out connector, which is to the left of the power supply connector. Do not connect a telephone line to the display connector. If you do, the printer and the telephone line may be damaged. Notes: The display module can be used only for the serial interface. To remove the cable, squeeze the connector and pull it out. Grounding the Printer You need a ground wire to ground your printer. Make sure that the wire is AWG 18 or equivalent. 1.
Make sure that the printer is turned off. Setting Up the Printer 1-7