Hantek 6000EU Digital Oscilloscope ■ From the “Probe” menu, select attenuation to 1:10. Set the switch to “X10” on the probe and connect it to CH1 of the oscilloscope. When using the probe hook-tip, insert the tip onto the probe firmly to ensure a proper connection. ■ Attach the probe tip to the Probe Compensator and the reference lead to the ground connector, select CH1, and then press the “ AUTOSET“ button into the menu or the toolbar. ■ Check the shape of the displayed waveform. Correctly Compensated Over Compensated Under Compensated 1. I f necessary, use a non-metallic tool to adjust the trimmer capacitor of the probe for the fattest square wave being displayed on the oscilloscope. 2.
Repeat if necessary. WARNNING: To avoid electric shock while using the probe, be sure the perfection of the insulated cable, and do not touch the metallic portions of the probe head while it is connected with a voltage source. USER’S MANUAL 12