Hantek 6000EU Digital Oscilloscope Trigger: 1. Trigger Mode : Sets the trigger mode 2. Trigger Sweep : Selects the trigger sweep mode to AUTO, NORMAL or SINGLE 3. Trigger Source : Selects the trigger source to CH1, CH2, CH3, CH4 4. Trigger Slope : Selects the edge trigger slope to Positive or Negative slope 2.6 Input Connector ■ CH1/CH2/CH3/CH4 : Input connectors for waveform display. ■ Other Connector: GND. : A ground terminal USER’S MANUAL 24