5. The result of cursor measurement will be displayed on the cursor menu. Automatic Measurement The oscilloscope provides 2 kinds of automatic measurements, including frequency and amplitude. Press button to enter, select Measure to enter automatic measurement. Press F1 to open, the measurement results will be displayed on the top left corner of the screen. Measurement Menu Table Frequency Measure the frequency of the signal. Maximum Voltage Measure the maximum voltage of the signal. Minimum Voltage Measure the minimum voltage of the signal. Attention: In the measurement result, the yellow font is the result of CH1, and the green font is the result of CH2. Utility Press button to enter.
Utility Menu Table Language 中文 English Set the menu language. Sound On Off Open the key sound. Close the key sound. Backlight luminance 1~10 Set backlight brightness of the screen. 30s Backlight time 60s 90s 120s Unlimited Set the screen backlight time. System information Display system information, such as software version or PCB version. 17 Menu Description Menu Setting Description