Application measurement EN 6 Application measurement 6.1 Measurement Configuration The measurement page has 5 test configurations: [Sample], [Average], [Trigger]， [Absolute] and [Delay].Below are the functions and setting methods of these measurement configurations. 6.1.1 Setting the sampling rate The sampling rate can be changed in three stages (Slow/Horotelic/Fast).The lower the sampling rate, the higher the testing accuracy. Steps for switching sampling rate: Click on the [MEA] button, and the display will be as follows: Figure 6-1 Measurement display interface Click on the Sample and it will display as follows. Press the corresponding soft key again to complete setting the sampling rate.
Copyright © Qingdao Hantek Electronic Co., LTD HBT3000 series user manual 25