Application measurement EN Figure 6-4 Set trigger source 6.1.4 Delay function Set the delay time from the input trigger signal to the start of measurement. If a trigger signal is input immediately after connecting the test object, the instrument will start measuring after the measurement value stabilizes by setting a delay time. The adjustable delay range is 1ms~9999ms, with a default of 1ms. Click on [MEA] -> Delay (ms) in sequence to set the delay time, as shown in the figure. Move the cursor position by left and right clicking, and click [OK] to input. Move the cursor to the key , then click [OK] to save and exit.
Figure 6-5 Setting Delay 6.1.5 Absolute value function The absolute value determination includes [Open] and [Close], and the absolute value determination defaults to Open. After enabling this function, even if the battery polarity is reversed, it can still be displayed as a positive value; If this Copyright © Qingdao Hantek Electronic Co., LTD HBT3000 series user manual 27