Command system EN 3.11 FREQuency subsystem The FREQuency subsystem sets the output FREQuency of the instrument. 3.11.1 SOURce :FREQuency Command format SOURce :FREQuency |MINimum|MAXimum SOURce :FREQuency? [MINimum|MAXimum] Function description Set the output frequency. Argument Instructions None Return format Return the frequency value +1.000000000000000E+03 as a scientific count. Example SOURce1:FREQuency 100 /* set the channel 1 output frequency to 100Hz */ 3.12 FSKey subsystem The FSKey subsystem is configured with Frequency Shift Keying (FSK) waveforms. 3.12.1 SOURce :MOD:FSKey:FREQuency Command format SOURce :MOD:FSKey:FREQuency |MINimum|MAXimum SOURce :MOD:FSKey:FREQuency?
[MINimum|MAXimum] SOURce :MOD:3FSKey:FREQuency1 |MINimum|MAXimum HDG3000B Programming manual Copyright © Qingdao Hantek Electronics Co., LTD 32 Name Range Default value Different waveforms correspond to different -- frequency ranges, refer to the relevant content in the user manual for details.