Harmonic Output EN 7.6 Set the Harmonic Phase Press [Wave] > Harmonic softkey to enter the harmonic setting menu and press Phase softkey to set the phase of each harmonic. 1. Index : Press this softkey to select the index number of the harmonic to be selected. 2. Phase : Press this softkey to set the phase of the selected subharmonic. Use the numeric keypad to input the phase value and then select the unit "°" from the pop-up menu, or use the direction keys and knob to modify the current value. For the input method of phase value, refer to the introduction in " Parameter Setting Method ". HDG3000B User manual Copyright © Qingdao Hantek Electronics Co., LTD 34