Command system EN SOURce :BURSt:INTernal:PERIod? Function description Set the output period of the burst (multi-period burst mode only) Argument Instructions None Return format None Example of returning the current period SOURce1: BURSt: INTernal: PERIod of 0.05 /* Set the burst period of channel 1 to 50ms */ 3.5.9 SOURce :BURSt:PHASe Command format SOURce :BURSt:PHASe |MINimum|MAXimum SOURce :BURSt:PHASe? [MINimum|MAXimum] Function description Set the onset phase of the burst. Argument Instructions None Return format Return the current phase.
Example Copyright © Qingdao Hantek Electronics Co., LTD HDG300C Programming manual 21 Name Range Default value PERIod Burst period ≥ 1μs + carrier waveform period × burst 10ms count Name Range Default value PHASe 0 ° to 360 ° 0 °