Command system EN Return format Return as a scientific count. Example SOURce1:MOD:DSBAM:INTernal:FREQuency 500 /* set the modulated wave frequency of channel 1 to 500Hz*/ 3.9.3 SOURce :MOD:DSBAM:INTernal:FUNCtion Command format SOURce :MOD:DSBAM:INTernal:FUNCtion SINusoid|SQUare|RAMP SOURce :MOD:DSBAM:INTernal:FUNCtion? Function description Select the modulated waveform shape. Argument Instructions ⚫ This command can only be used with internal modulation sources ⚫ The pulse and DC cannot be the carrier waveform of DSB-AM. (DSBAM:SOURce INTernal). Return format Return the current modulated waveform shape, SINusoid, SQUare, or RAMP.
Example SOURce1:MOD:DSBAM:INTernal:FUNCtion SQUare /* Set the waveform shape of Channel 1 modulated wave to square wave */ 3.10 FM subsystem 3.10.1 SOURce :MOD:FM:DEViation Command format SOURce :MOD:FM:DEViation |MINimum|MAXimum SOURce :MOD:FM:DEViation? [MINimum|MAXimum] Copyright © Qingdao Hantek Electronics Co., LTD HDG300C Programming manual 29 Name Range Default value FUNCtion SINusoid|SQUare|RAMP SINusoid