Programming instance EN SOURce1:FUNCtion SQUare SOURce1:FUNCtion:SQUare:DPeriod 20 SOURce1:FREQuency 100000 SOURce1:VOLTage 4 OUTPut1 ON 4.3 Configure the sawtooth wave Instructions A sawtooth wave has amplitude, offset, and phase relative to a synchronous pulse. It also has the symmetry used to create triangular waveforms and other similar waveforms. Instance The following waveforms can be set by the SCPI command series SOURce1:FUNCtion RAMP SOURce1:FUNCtion:RAMP:SYMMetry 25 SOURce1:FREQuency 1000 SOURce1:VOLTage 2 SOURce1: VOLTage OFFSet of 1.0 OUTPut1 ON 4.4 Configure the pulse wave Instructions The pulse wave has amplitude, offset, and phase with respect to the synchronous pulse.
It also has the edge slope, period, and duty cycle (or pulse width). Its amplitude and offset can be set by high and low voltage values. Instance The following waveforms can be set by the SCPI command series HDG300C Programming manual Copyright © Qingdao Hantek Electronics Co., LTD 70