HDG3000C Quick Guide20230220083127 (EN)

HDG3000C series Arbitrary waveform signal generator Quick Guide 2022.05

Стр. 1

Warranties and Declarations

Warranties and Declarations Copyright The copyright of this document belongs to Qingdao Hantek Electronics Co., LTD. Statement Qingdao Hantek Electronics Co., Ltd. reserves the right to amend this document without prior notice. Qingdao Hantek Electronics Co., Ltd. promises that the information provided is correct and reliable but does not guarantee that this document is free from errors. Before using this product, please make sure that the specifications of relevant technical documents are the latest effective version.

If you use documents or products of Qingdao Hantek Electronics Co., LTD and need products, patents or works of third parties to cooperate with them, you shall be responsible for obtaining the consent and authorization of the third parties. The above consent and authorization shall not be the liability of Hantek. Product certification Hantek certified HDG300C-series arbitrary waveform signal generators to meet China's national industry standards and has passed the CE certification. Contact us If you have any questions when using the products of Qingdao Hantek Electronics Co., LTD., you can obtain service and support through the following ways: Email:

service@hantek.com, support@hantek.com Website: http://www.hantek.com

Стр. 2

1.1 Summary of general safety matters

Safety requirements EN 1 Safety requirements 1.1 Summary of general safety matters Read the following safety precautions carefully to avoid injury and to prevent damage to this product or any product connected. To avoid possible dangers, please use this product in accordance with the regulations. ⚫ Only professionally authorized personnel can perform repairs. ⚫ Use the right power cable. Use the power cable approved by the country in which the product is used only. ⚫ Connect and disconnect correctly. Before connecting the probe to the circuit being measured, please connect the probe to the oscilloscope first.

Before disconnecting the probe from the oscilloscope, please disconnect the probe and the circuit under test first. ⚫ Ground the product. To avoid electric shocks, the product is grounded through a grounding conductor of the power cable. The grounding conductor must be connected to the ground before connecting the input or output terminals of the product. Ensure that the product is properly grounded. ⚫ Connect the probe properly. The ground wire of the probe is the same as the ground potential. Do not connect the ground wire to high voltage. ⚫ View all terminal rating values. To avoid fire or excessive current, please check all rating values and signs on the product.

Please consult the product manual for details of the rating values before connecting the product. ⚫ Do not operate with the cover open. Do not run the product with the cover or panel open. ⚫ Avoid circuit exposure. Do not touch exposed connectors and components after power is switched on. ⚫ Do not operate if the product is suspected to be faulty. If you suspect that the product has been damaged, please ask qualified maintenance personnel to check it. Copyright © Qingdao Hantek Electronics Co., LTD HDG3000C Quick Guide 1

Стр. 3

1.2 Safety terms and symbols

Safety requirements EN ⚫ Maintain proper ventilation. ⚫ Do not operate in a humid environment. ⚫ Do not operate in inflammable or explosive environment. ⚫ Please keep the product surface clean and dry. Warning: Equipment that meets Class A requirements may not provide adequate protection for broadcast services in residential environments. 1.2 Safety terms and symbols Safety terms in this manual: Dangerous Indicates that immediate damage may be caused to you if you perform this operation. Warning: Indicates that it may not cause immediate damage to you if you perform this operation. Note Indicates that you may cause damage to this product or other properties if you do so.

Safety terms on the product: Warning: Indicates a potential hazard to you if you do not perform this operation. Safety symbols on the product: HDG3000C Quick Guide Copyright © Qingdao Hantek Electronics Co., LTD 2

Стр. 4