Quick start EN Figure 4.6 User Interface 1. Displays the selected channel. CH1 、 CH2 、 CH3 2. Channel Parameters Display the waveform parameters of the current channel. Press the parameter softkey and use the numeric keypad or direction keys and knob to modify the value. The parameters that can be modified will be highlighted, and the red background of the number indicates the current cursor position. 3. Waveform Display the selected waveform type of the current channel. 4. Channel Configuration Displays the output configuration of the current channel, including waveform type, output impedance, operating mode and output state. Output Impedance: HighZ (High Impedance) or 50Ω. Mode:
Modulation, Sweep, Burst or Continuous output. 5. Menu Displays the operation menu corresponding to the currently selected function. For example, the function menu of the [Wave] button is displayed in the figure. 4.5 Parameter Setting Method Users can use the numeric keypad or knob and direction keys to set parameters. HDG3000C User manual Copyright © Qingdao Hantek Electronics Co., LTD 16