Return value The query returns the number of loops, if it returns 0, it is a continuous loop output. For example /* Set the number of cycles of channel 1 list to 10*/ LIST:REPEat:COUNt 10,(@1) LIST:REPEat:COUNt? (@1) /*Return 10*/ List Switch ： LIST:RUN Command format LIST:RUN LIST:RUN? Function description Set or query the status of the list switch. Parameter swi: OFF | ON | 0 | 1 chn: Refer to the CURRent command. Description The function is the same as pressing the RUN/STOP button in the menu. Return value Return OFF | WAIT | RUNNING OFF: List closed. WAIT: List waiting to be triggered. RUNNING: List is running. For example LIST:RUN ON,(@1) /* Open channel 1 list */ LIST:RUN?
(@1) List Trigger Signal ： LIST:TRIGger Command format LIST:TRIGger Function description Send the list trigger signal of the corresponding channel. Parameter chn: Refer to the CURRent command. Description If the corresponding channel list is in WAIT state and the trigger source is RMT, the list starts to execute, otherwise it is invalid. Return value None For example LIST:TRIGger (@1) /* Send channel 1 list trigger signal */ 17