Safety requirements EN 1.2 Security terms and symbols Safety terms in the manual: Warning: Indicates that this operation may not cause immediate damage to you. Note: Indicates that you may damage the product or other property if you do so. Safety terms on the product: RATING: Indicates that if you do not perform this operation, potential harm may be caused. Safety symbols on the product: warning Test ground 1.3 Ventilation requirements The instrument is forced cooled by a fan. Ensure that the intake and exhaust areas are unblocked, and free flowing air is available.
In order to ensure adequate ventilation, when using the instrument in the workbench or rack, please make sure that the two sides, above and behind should leave a gap of at least 10 cm. Note: Poor ventilation will cause the temperature of the instrument to rise, which will damage the instrument. Good ventilation should be maintained when using. Ventilation vents and fans should be checked regularly. 1.4 Work environment HDP10000 series user manual Copyright Qingdao Hantek Electronics Co., LTD Working conditions: 2