REAR PANEL MAIN POWER SWITCH & JACKS MAIN POWER button This power button is for the complete system, and must be turned ON/OFF manually. It is recommended to leave the “MAIN POWER” to ON condition (lights red) for stand-by mode. NOTE: It is required that there should be at least 5 seconds between MAIN POWER button off than on. ANTENNA Input Antenna input that connects to the antenna, cable box, or CATV cable. Supports NTSC/PAL/SECAM television system. VIDEO1 Inputs Provide Y-P B P R jacks for connecting equipment with this capability, such as a DVD player or Set Top Box.
VIDEO1 Audio Input Connect audio for Y-P B P R input (if you have mono sound, insert the audio cable into the left(L) audio jack). VIDEO2 Inputs Provide Y-P B P R jacks for connecting equipment with this capability, such as a DVD player or Set Top Box. VIDEO2 Audio Input Connect audio for Y-P B P R input (if you have mono sound, insert the audio cable into the left(L) audio jack). 14