ON-SCREEN DISPLAY MENU Ǐ PICTURE MENU ǐ 4 Repeatedly press the ź cursor button to select Color Manager option, and then press the Ź cursor button to enter the menu as shown on right. 2Q 6HOHFW 5HWXUQ Each items in picture menu as shown below: 17 &RORU0DQDJHU &RORU0DQDJHU 0DJHQWD 5HG *UHHQ &\DQ %OXH 5HVHW Item Ż Ź Note Picture Mode Dynamic Natural Theater Favorite Suggesting that you try every item to obtain the desired picture effect. It’s convenient for you to press PICTURE button to switch among the four picture modes.
Contrast Narrow the difference between the brightness and darkness Enhance the difference between the brightness and darkness Please adjust according to the personal preference (Suggesting that the setting is set on the factory setting.˅ Brightness Brightness reduction Enhancing brightness Color Color thickness weaker Color thickness stronger Tint Enhance red, reduce green Enhance green, reduce red Tint display can be effective and adjusted only by receiving NTSC signal or using the Y, PB/CB, PR/CR input. Adjustment can be made on the basis of the actual color. Sharpness soft sharp It is set in the middle normally. Color Temp. Cool Normal Warm It is set by cool normally.
PAL Comb Filter On Off Only when receiving PAL signal, PAL Comb Filter option can be set on or off. The other signals of its option are set by inside auto setting. Film Mode On Off HD or progressive signals input, Film Mode will not adjust. While the Film Mode is on, a special built-in correcting circuit in the TV will improve the video performance when viewing film based sources. Noise Reduction Off Low High Noise Reduction can be determined freely according to the signal condition and the picture noise. Contrast Mode Normal Auto Dynamic Selecting among the three modes of normal, auto and dynamic to obtain the best effect.
Black Stretch Off Low Middle High Adjust shadow detail in dark scenes. Color Manager Magenta Red Yellow Green Cyan Blue On Off When the Color Manager option is set on, you can adjust and balance their individual color for your personal preference to obtain the deeper and purer color effect.
Magenta Reduce purple thickness Enhance purple thickness Red Reduce red thickness Enhance red thickness Yellow Reduce yellow thickness Enhance yellow thickness Green Reduce green thickness Enhance green thickness Cyan Reduce cyan thickness Enhance cyan thickness Blue Reduce blue thickness Enhance blue thickness Reset Make sure the reset function The current setting of the menu return to the factory setting.˄Press ENTER button can also be reset.˅