en Familiarising yourself with your appliance 4.4 Touch displays Ў Heating line Once operation has started, the white line below the temperature turns red as the cooking compartment heats up. When you are preheating the appliance, the optimal time to place your food in the cooking compartment is as soon as the entire line has turned red. With set levels such as grill settings, the heating line turns red immediately. The heating line does not appear when using the microwave. Ў Residual heat indicator When the appliance is switched off, the display ring shows the residual heat in the cooking compart- ment.
As the residual heat dissipates, the display ring gets darker before eventually disappearing completely. The touch displays act as both displays and controls. The touch displays are divided into several text fields. The text fields show you the current selection options and settings that have already been implemented. To select a function, press directly on the corresponding field. The selected function is marked with a red vertical bar on the side of the text field. The value for this is high- lighted in white in the Display → Page 10 . The small red arrow next to the text field shows you the function that you can scroll back to.
4.5 Control ring You can use the control ring to change the setting val- ues that are shown in the display and scroll in the touch displays. When you reach the minimum or maximum value avail- able, this value remains in the display. If required, use the control ring to turn the value back again. 4.7 Cooking compartment The functions in the cooking compartment make your appliance easier to use. 4.6 Display Shelf supports The rails in the cooking compartment enable you to place accessories at different heights. → "Accessories", Page 13 Your appliance has five shelf positions. The shelf posi- tions are numbered from bottom to top.
The rails are equipped with pull-out rails on one or more levels, depending on the appliance type. You can remove the rails, e.g. for cleaning. → "Rails", Page 35 The display shows the current setting values on differ- ent levels. Value in the foreground The value in the foreground is high- lighted in white. You can use the control ring to change the value directly. Once operation has started, the temper- ature or level is displayed in the fore- ground. When using the microwave, the cooking time is displayed in the foreground. Value in the background Values in the background are displayed in grey. To change the value using the control ring, select the required function in advance.
Enlarge- ment As long as you use the control ring to change a value, only this value will be displayed as enlarged. Display ring The display ring is located around the outside of the display. Ў Position indicator If you change a value, the display ring shows you where you are in the selection list. The display ring may be continuous or divided into segments de- pending on the settings area and the length of the selection list. Ў Progress indicator During operation, the display ring displays the pro- gress and turns red at second-long intervals. As the cooking time counts down, one segment of the display ring disappears every second.
Lighting One or more oven lights illuminate the cooking com- partment. When you open the appliance door, the light in the cooking compartment switches on. If the appliance door remains open for longer than 15 minutes, the light switches off again. For most operating modes, the lighting is switched on during operation. The lighting switches off again when the operation ends. Temperature display The heating line and the residual heat indicator show you the temperature in the cooking compartment. Due to thermal inertia, the temperature that is displayed may differ slightly from the actual temperature inside the cooking compartment.
Cooling fan The cooling fan switches on and off depending on the appliance's temperature. The hot air escapes above the door. 10