en Basic operation 8. Once the appliance has cooled down, clean the 10. Empty the water tank and dry the cooking compart- smooth surfaces in the cooking compartment with soapy water and a dish cloth. 9. Clean the accessories thoroughly using soapy water ment. → "After every steam operation", Page 20 and a dish cloth or soft brush. 8 Basic operation 8.1 Switching on the appliance 4. Use the control ring to change the values. 5. Press to start. ▶ Press to switch the appliance on. a The Bosch logo appears in the display. The types of heating then appear. 8.6 Setting the type of heating and temperature 8.2 Switching off the appliance Requirement:
The operating mode "Types of heating" has been selected. 1. Press the type of heating that you want to use. Switch your appliance off when you are not using it. The appliance will switch itself off automatically if it is not used for a certain period of time. ▶ Press to switch the appliance off. a The appliance switches off. Any functions currently If you cannot see the type of heating in the touch displays, use the control ring to scroll though the se- lection list. a The temperature is highlighted in white. in progress are cancelled. a The time or residual heat indicator appears in the 2. Use the control ring to set the temperature. 3. Press to start. a The appliance starts heating.
a The target temperature, the time and how long the display. 8.3 Starting operation You must start each operation. ATTENTION! If there is water on the cooking compartment floor when operating the appliance at temperatures above 120 °C, this will damage the enamel. ▶ Do not use the appliance if there is water on the cooking compartment floor. ▶ Wipe away any water on the cooking compartment floor before operation. appliance has already been in operation are shown in the display. 4. When the food is ready, press to switch the appli- ance off. Tip: The most suitable type of heating for your food can be found in the description of the type of heating. Note:
You can also set a cooking time and end time on the appliance. → "Time-setting options", Page 17 Changing the type of heating When you change the type of heating, the other set- tings will also be reset. 1. Press to pause operation. 2. Press "Types of heating". 3. Press the type of heating that you want to use. a The corresponding default temperature appears in ▶ Press to start. a The settings, the running time, the display ring and the heating line appear in the display. 8.4 Pausing or cancelling operation You can briefly pause operation and then continue. If you cancel operation completely, the settings will be re- set. 1. To pause operation briefly: the display.
Changing the temperature Once operation has started, you can change the tem- perature directly. ▶ Use the control ring to change the temperature. a The temperature is applied immediately. ‒ Briefly press . ‒ To continue operation, press . 2. To cancel operation completely, press and hold for approx. 3 seconds. a Operation will stop and all the settings will be reset. 8.7 Displaying information 8.5 Setting the operating mode In most cases, you can call up information about the function that you have just started. The appliance dis- plays some information, e.g. to ask you to do/confirm something or to issue a warning, automatically. 1. Press .
a If available, information is displayed for a few Once you have switched on the appliance, it suggests an operating mode, e.g. types of heating. 1. If you want to use a different operating mode to the one suggested, press . a The list of operating modes is displayed. → "Operating modes", Page 11 2. Press the operating mode that you want to use. 3. To implement other settings, press the relevant text seconds. 2. Use the control ring to scroll through longer pas- sages of text. fields. 16