Chapter 7: Maintenance Table 7-1. Typical Cleaning Schedule, Non-raw Food NOTE: The following cleaning actions and intervals are suggestions only. Refer to HACCP guidelines to determine what is required for your installation. Table 7-2. Typical Cleaning Schedule, Raw Food Chemical Compatibility CAUTION: Not all materials used on the Hornet 565 are compatible with all cleaning solutions available. Caustic The Hornet 565 is designed to be compatible with moderate cleaning agents commonly used in the cleaning of food-processing equipment, at room temperature. All robot components are designed to handle daily exposure to cleaning agents.
Exposure may result in some dis- coloration of the materials, but no significant material removal. NOTE : Anodized parts cannot be tank cleaned. Highly caustic cleaning agents are not suitable for the Hornet 565. Acidic In general, acidic cleaning solutions are incompatible with the Hornet 565's materials. For acidic environments, contact Omron Adept Technologies, Inc. 7.2 Periodic Maintenance Schedule Suggested Inspection Schedule on page 101 gives a summary of the inspection and main- tenance procedures, and guidelines on frequency. NOTE: The estimated times listed in the following table are for the inspection, not repairs.
Hornet 565 Robot User's Guide, 14608-000 Rev C Page 100 of 156 Item Interval Suggested Cleaning Action Outer Arms and Ball Studs 1 Week Clean with wipes or water. Platform 1 Week Clean with wipes, air, or water. Item Interval Suggested Cleaning Action Minimum: Entire robot Daily Clean In Place Optional: Platform Daily Clean Out of Place (dunk)