Chapter 6: Options The belt encoder lead can be split into two belt encoder leads with the belt encoder Y-adapter. See System Cable Diagram with Belt Encoder Cables on page 42. 6.8 Cable Inlet Box The addition of the cable inlet box raises the entire robot’s IP rating to IP65. Cable Exit from Rear of Box 185 (Mounting Surface) Figure 6-3. Cable Inlet Box Mounted on a Hornet 565 NOTE: The cable inlet box is not USDA compliant. Drainage of wash-down from the cable seal assembly does not comply with USDA requirements. Overview The cable seal assembly must be mounted on the top of the robot during the robot installation process.
The cable seal assembly is an extra-cost option, and is shipped separately from the robot. Hornet 565 Robot User's Guide, 14608-000 Rev C Page 89 of 156