System Setup menu Use this menu to establish basic printer settings. The System Setup menu has several sub-menus. Each is described in the following table. Menu item Sub-menu item Sub-menu item Description Language Select the language for the control-panel display messages and the printer reports. Paper setup Def. paper size Letter A4 Select the size for printing internal reports or any print job that does not specify a size. Legal Def. paper type A list of available media types appears. Select the media type for printing internal reports or any print job that does not specify a type. Tray 1 Paper size Select the default size and type for tray 1 from the list of available sizes and types.
Paper type Tray 2 Paper size Select the default size and type for tray 2 from the list of available sizes and types. Paper type Tray 3 Paper size Select the default size and type for tray 3 from the list of available sizes and types. Paper type Paper out action Wait forever Select how the printer should react when a print job requires a size or type that is not available or when a specified tray is empty. Override Cancel Select Wait forever to make the printer wait until you load the correct media and press OK . This is the default setting. Select Override to print on a different size or type after a specified delay.
Select Cancel to automatically cancel the print job after a specified delay. If you select either Override or Cancel , the control panel prompts you to specify the number of seconds to delay. Press > to increase the time, up to 3600 seconds. Press to decrease the time. Print quality Calibrate color After power on After power on : Select how soon the printer should calibrate after you turn it on. The default setting is 15 minutes . Calibrate now Calibrate now : Makes the printer perform a calibration immediately. If a job is processing, the printer calibrates after the job is complete. If an error message is on the display, you must clear the error first. ENWW Using the control-panel menus 9