Network Config. menu (HP Color LaserJet 2700n printer only) Use this menu to establish network configuration settings. Menu item Sub-menu item Description TCP/IP config Automatic Select Automatic to automatically configure all the TCP/IP settings. Manual Select Manual to manually configure the IP address, subnet mask, and default gateway. Link Speed Automatic The printer should automatically detect the correct link speed for the network. Use this menu to set the link speed manually, if necessary. 10T Full 10T Half After you set the link speed, the printer automatically restarts.
100TX Full 100TX Half Restore defaults Press OK to restore the network configuration settings to the default values. ENWW Using the control-panel menus 11