Using this Manual This service manual contains information necessary to test, adjust, and service the Hewlett-Packard Models C2858A and C2859A DesignJet 650C plotters. It is designed to help you easily find the cause of a C2858A/C2859A hardware problem and to perform the necessary repairs and adjustments to get the plotters into proper operating condition. Service strategy for this manual is to support the products to the field replaceable unit. For ease of reference, this manual is divided into ten chapters as follows:
Chapter1 Product Information Chapter2 Site Planning and Requirements Chapter3 Installation and Configuration Chapter4 Preventive Maintenance Chapter5 Functional Overview Chapter6 Removal and Replacement Chapter7 Adjustments/Calibrations Chapter8 Troubleshooting Chapter9 Product History Chapter10 Parts and Diagrams Chapter 1. Product Information This chapter contains general information regarding the C2858A and C2859A DesignJet 650C plotters. A description of the plotters features, options and accessories, performance characteristics, and serial number information, is included in this chapter. Chapter 2.
Site Planning and Requirements Included in this chapter is pre-installation information regarding the physical, environmental and electrical requirements for proper installation and operation of the plotters. Chapter 3. Installation and Configuration In this chapter you will find installation, configuration and plotter verification procedures. Included is information on ink cartridge and media loading, accessing the front-panel menu structures for plotter configuration and instructions on how to perform built-in demonstration plots to verify proper plotter operation. Using this Manual iii