HP — Removal and Installation

Removal and Installation 8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever Assembly 8-18 Right Hand Trim 8-20 Left Hand Trim 8-22 Back Cover 8-23 Ink Tubes System 8-25 EMC Covers 8-32 Encoder Strip 8-34 Trailing Cable 8-36 Tensioner Assembly 8-42 Carriage Assembly and Belt 8-46 Line Sensor 8-53 Scan-Axis Motor 8-57 Cutter Assembly 8-60 Ink Supply Station (ISS) 8-64 Air Pressurization System (APS) 8-67 Service Station Assembly 8-69 Drop Detector Assembly 8-72 Hard Disk Drive (HDD) 8-74 LAN Card 8-76 Memory and BootROM DIMM’s 8-77 Electronics Module Cover 8-79 Main PCA 8-81 PCI-to-IDE PCA 8-85 Power Supply Unit (PSU) 8-88 Ink Supply Station (ISS) PCA 8-91 Ink Leak Detector - If Present (Only Applicable to the 5000 Series) 8-93 Cooling Fans 8-95 Electronics Module (as one complete Assembly) 8-97 Pinch-Wheels 8-98 Pinch-Wheel Cam 8-100 Vacuum Fan 8-103 Paper-Axis Motor Assembly 8-105 Booster Fan 8-108 Media Sensor 8-109 Entry Roller 8-111 Center Guide Assembly 8-112 Drive Roller Gear 8-114 Front Platen Assembly (Only Applicable to the 5000 Series) 8-115 Center Platen Assembly 8-117 Deflectors (Only Applicable to the 5000 Series) 8-119 Heater Assembly (Only Applicable to the 5500 Series) 8-120 Tube Guide Door 8-124 8-1 HP DesignJet 5000 and 5500 Series Printers Service Manual