Removal and Installation Installation of Cam 1. To install the Cam slide it through the left Sideplate and place it in the cam slot in the beam. 1. INSERT 2. INSERT INTO CAM SLOT IN THROUGH SIDEPLATE BEAM 2. Hold the Cam Lever Linkage over its slot in the Sideplate and insert the Cam into it. 2 2. INSERT 1. POSITION LINKAGE 3. Push the Cam with the Cam Lever Linkage into the Sideplate. 8-102 HP DesignJet 5000 and 5500 Series Printers Service Manual