Removal and Installation Media Lever Assembly Removal WARNING Switch off the Printer and remove the Power Cord. NOTE Refer to the table on Page 8-4 for information on screw types. 1. Only applicable to the DesignJet 5000 Series - Remove the Deflector closest to the Right Cover - Refer to Page 8-119 . 2. Remove the Right Hand Cover - Refer to Page 8-10 . 3. Raise the Media Lever. 4. Remove 1 T-15 screw ( Type D ) from the support that attaches the Media Lever to the Sideplate. 8-18 HP DesignJet 5000 and 5500 Series Printers Service Manual