Removal and Installation 7. Remove the following screws ( Type N ) from the Top EMC Cover. 8 T-15 screws for the 60" Model. 6 T-15 screws for the 42" Model. 8. Loosen 4 T-15 screws ( Type L ) on Lower Covers and remove all Covers as one assembly. Lower Right Cover 1. Do steps 1 to 5 of the EMC Covers as one assembly procedure. 2. Remove 2 T-15 screws ( Type B ) and loosen 2 T-15 bottom screws ( Type L ) to remove cover. Top EMC Cover 1. Do steps 1, 2 and 6 of the EMC Covers as one assembly procedure. 2. Remove the following screws ( Type B and N ) screws from the Top EMC Cover. 13 T-15 screws for 60" Model. 11 T-15 screws for 42" Model. 3. Lift the Top EMC Cover off Printer.
8-33 HP DesignJet 5000 and 5500 Series Printers Service Manual