Copyright Information © 2005 Copyright Hewlett-Packard Development Company, L.P. Microsoft ® and Windows ® are U.S. registered trademarks of the Microsoft company. Trademark Credits Reproduction, adaptation or translation without prior written permission is prohibited except as allowed under the copyright laws. Safety Information WARNING! The information contained in this document is subject to change without notice. Potential Shock Hazard The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
HP shall not be liable for technical or editorial errors or omissions contained herein. Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock. Read and understand all instructions in the user guide. Observe all warnings and instructions marked on the product. Part number Q5911-90945 Edition 1, 4/2005 Use only a grounded electrical outlet when connecting the HP LaserJet 1010 series printer or HP LaserJet 1020 printer to a power source. If you don’t know whether the outlet is grounded, check with a qualified electrician. Information regarding FCC Class B, Parts 15 and 68 requirements can be found in the user guide.
Do not touch the contacts on the end of any of the sockets on the HP LaserJet 1010 series printer or HP LaserJet 1020 printer. Replace damaged cords immediately. NOTICE TO U.S. GOVERNMENT USERS: RESTRICTED RIGHTS COMMERCIAL COMPUTER SOFTWARE: “Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) (1)(ii) of the Rights in Technical Data Clause at DFARS 52.227-7013.” Unplug this product from wall outlets before cleaning or servicing. Do not install or use this product near water or when you are wet. Install the product securely on a stable surface.
Install the product in a protected location where no one can step on or trip over the power cord and the power cord will not be damaged. If the product does not operate normally, see the online user guide.