Site Requirements The following environmental specifications must be maintained to ensure the proper operation of the printer. Consider the following points before installing the printer: G Install in a well-ventilated, dust-free area. G Install on a hard, flat and continuous surface, with all four printer feet level. Do not install on carpet or other soft surfaces. G Ensure adequate power is supplied. Printer power requirements are listed in Table 1-3. G Install where temperature and humidity is stable, away from water sources, humidifiers, air conditioners, refrigerators, or other major appliances. G Install away from direct sunlight, open flames, or ammonia fumes.
If the printer is placed near a window, make sure the window has a curtain or blind to block any direct sunlight. G Install with enough space around the printer for proper access and ventilation. G Install printer away from the direct flow of exhaust from air ventilation systems. Table 1-3. Electrical Specifications Volts Frequency Amps Watts (typical) 100-127 VAC±10% 50/60 Hz ±3Hz 11 amps printing = 365 standby = 40 PowerSave On = 27 (EPA E NERGY S TAR ®) 220-240 VAC±10% 50/60 Hz ±3Hz 5 amps printing = 355 standby = 40 PowerSave On = 22 (EPA E NERGY S TAR ®) 1-6 Printer Description EN