Paper-pickup assembly 1. Remove the following assemblies. ● Scanner assembly. See Scanner assembly on page 67 . ● Left cover. See Device side covers on page 82 . ● Rear cover and fuser cover. See Rear cover and fuser cover on page 86 . ● Print cartridge door. See Print-cartridge door on page 85 . ● Front cover. See Front cover on page 88 . ● Transfer roller. See Transfer roller on page 80 . ● Fuser. See Fuser on page 105 . 2. Unplug and remove any additional wire-harnesses as necessary to release the paper-pickup assembly. Unplug and remove the wire from the solenoid to the formatter. 3. Remove six screws (callout 1) and remove the assembly.
Figure 6-68 Remove the paper-pickup assembly ENWW Removal and replacement strategy 107