Table 1-7 Stapler part of the optional stapler/stacker supported sizes and weights Size Dimensions Weight Capacity Letter 216 x 279 mm (8.5 x 11 inches) For plain media: 60 to 120g/m 2 For plain media: 30 sheets of 75g/ m 2 (20 lb) paper A4 210 x 297 mm (8.3 x 11.7 inches) (16 to 32 lb) Legal 216 x 356 mm (8.5 x 14 inches) For thick media: 128 to 199g/ m 2 (34 to 53 lb) For glossy media: 20 sheets 8.5 x 13 216 x 330 mm (8.5 x 13 inches) For thick media:
the stack height must not exceed 7 mm (0.27 inch) Executive(JIS) 216 x 330 mm (8.5 x 13 inches) Table 1-8 ADF supported sizes and weights Size Dimensions Weight Capacity Letter 216 x 279 mm (8.5 x 11 inches) 60 to 120g/m 2 (16 to 32 lb) 50 sheets of 75g/m 2 (20 lb) paper A4 210 x 297 mm (8.3 x 11.7 inches) A5 148 x 210 mm (5.8 x 8.3 inches) Legal 216 x 356 mm (8.5 x 14 inches) General media specifications For complete paper specifications for all HP LaserJet devices, see the HP LaserJet Printer Family Print Media Guide (available at http://www.hp.com/support/ljpaperguide ) .
Category Specifications Acid content 5.5 pH to 8.0 pH Caliper 0.094 to 0.18 mm (3.0 to 7.0 mils) Curl in ream Flat within 5 mm (0.02 in) Cut edge conditions Cut with sharp blades with no visible fray. Fusing compatibility Must not scorch, melt, offset, or release hazardous emissions when heated to 200° C (392°F) for 0.1 second. Grain Long grain Moisture content 4% to 6% by weight Smoothness 100 to 250 Sheffield Media considerations Envelopes Envelope construction is critical. Envelope fold lines can vary considerably, not only between manufacturers, but also within a box from the same manufacturer. Successful printing on envelopes ENWW Media specifications 15