Default Copy Options Administration > Default Job Options > Default Copy Options NOTE: Values shown with “(default)” are the factory-default values. Some menu items have no default. Table 2-3 Default Copy Options menu Menu item Submenu item Values Description Number of Copies Type the number of copies. The factory default setting is 1. Set the default number of copies for a copy job. Number of Sides 1 (default) Set the default number of sides for copies. 2 Staple/Collate Staple None (default) Set up options for stapling and collating sets of copies.
When you make multiple copies of a document, collating places the pages in the correct order, one set at a time, rather than placing all copies of each page next to each other. Collate Off Staple options On (default) Output Bin Bin numbers/name Select the default output bin, if applicable, for copies. Edge-To-Edge Normal (recommended) (default) If the original document is printed close to the edges, use the Edge-To-Edge feature to avoid shadows that can appear along the edges. Combine this feature with the Reduce/Enlarge feature to ensure that the entire page is printed on the copies.
Edge-To-Edge Output Auto Include Margins Off (default) Select this feature to ensure that the entire image appears on the copy, including any content that is close to the edges. If necessary, the product shrinks the image slightly, depending on the size of the printable area on the paper. On 18 Chapter 2 Control panel ENWW