Table 2-10 Jetdirect menus (continued) Menu item Submenu item Submenu item Values and Description On (default): Enable the AppleTalk protocol. DLC/LLC Enable Off : Disable the DLC/LLC protocol. On (default): Enable the DLC/LLC protocol. Security Print Sec Page Yes : Prints a page that contains the current security settings on the HP Jetdirect print server. No (default): A security settings page is not printed. Secure Web For configuration management, specify whether the embedded Web server will accept communications using HTTPS (Secure HTTP) only, or both HTTP and HTTPS. HTTPS Required (Default) : For secure, encrypted communications, only HTTPS access is accepted.
The print server will appear as a secure site. HTTP/HTTPS optional : Access using either HTTP or HTTPS is permitted. IPsec or Firewall Specify the IPsec or Firewall status on the print server. Keep : IPsec/Firewall status remains the same as currently configured. Disable (Default): IPsec/Firewall operation on the print server is disabled. Reset Security Specify whether the current security settings on the print server will be saved or reset to factory defaults. No (default): The current security settings are maintained. Yes : Security settings are reset to factory defaults. ENWW Use the Administration menu 29