Paper Skew &Registration Specifications The skew and registration specifications for some of the models in the HP LaserJet Family are@enbelow. Pleasenotethatthe LJ2000 regiater(A4 &Letter) paperfiomthelong edge, all other W LaserJets are from the short edge. ~esefi~res assume a sheet of paper with 4 right-angle corners. J 4 Y I Skew (v- z) The skew tolerance for all HP LaserJets is 1.5mm (0.06m) along the (lefi-hand) len@, ~e. over a distance of 260mm (10.25rn) Printable Area 2 /~ lb PaDer RWstration Suetilcations Re@strationconcemsthepostilon oftext ontiepaper. LeadingEdgeofpaper I I Lefiedgeofthepaperto to first horiz. dot row the firstverticaldot row I 8.Omm+/- 2.Omm (x)[l] ??
II 5.0mm+/-2.5mm (X) 4.Omm+/-2mm(y) IID 4.2mm+ /- 2.5mm (X) 4.2mm+/-2mm~) III 5.Omm+/-2.5mm (X) 6.Omm+/-2mm(y) IIID 4.2mm + / - 2.5mm (X) 6.Omm+/-2mm(y) IIPflIP+/IIIP 3.omm+/- l.omm (x) 5.Omm+/-2mm@) ?? 4.7mm+/-2mm(y) 4.2mm+/-2nnn(y) 6.4rmn+l - 2rmn(y) 6.4mm+/- 2mm (y) 6.Omm+/- 2mm (y) 2000 6.0mm+ /- 2.5mm (X) 4.25rnm+ /- 2mm(y) 4.25mm+ /- 2mm(y) [1] This is measured using a Self-Test page. Note: The LaserJet ItP / IIP+ / IIIP and the 2000have a setice adjustment for the top -gin (leafig edge of paper to fiat hotiontal dot row.) These can only be accessed by service personnel and ahotid only need adjustmmt when the DC Controller PCA is replaced. 1-9