aserJetILP (33471), ~+(C2007), IIIP(33481) These ptiters do not return status and do not have an optional I/O slot. ~ese laserJet, rerntended to be cotmected to PCs ordy. ,aserJet2000 (2684A/P/D) Contignration ofthia printer is acheivedvia 2 banks of rocker *ches on the Formattf ~srd. ~ese are accessed throu~ a fip-down panel on the RHS of the upper section of th rinter@omttersetion). WITCH 12- all rockers set to OPEN WITCH 14 1 -OPEN 2 -X Baud rate seletion 3 -X Baud rate selection 4 -X Baud rate selecdon 5 -OPEN 6 -OPEN 7 -OPEN 8 -CLOSED(SelectDTRpolarity) 9 -CLOSED(DTRhandahake enabled) 10 -OPEN 11 -CLOSED 12 -CLOSED(Xotioffenabled) ‘oteto Remember:
Baud Rate Selection 600 001 1200 010 2400 011 4800 100 9600 101 19200 110 *HP TerrnTypesfor HP ~stems will send an ESC”E” at the be~”nningof sprint job to reset theprinterto defardt values. *Robust Xon MUST be enabled on all HP LaserJetprinters. *AllHP LaserJets run with 8 data bits, nopan”@. IPE Classic&XL Matrix [2] PhgsintoresrqrtionslVOslotsetI/Oto “OP170NAL’’onFrontPanzPJN=26013-60001 [3]~CL26isnot~potied .n~CC;wecable92219G orl3242N@inBpti2.3&7, Shieldpin 1 connct atone end on@. [4] TTPCL26 ispreferredssstatuscheckingisdoneatthebeginning&endofspoofie, TI’PCL22does thissttheendofeveryIirre,therefareisslower.Use cable 40242Xor 13242 (3pin), use cable 40242P or 13242P (5pin).
[5]LJItP/IR+/IIIPareNOTsuppartedontheHP3000 ~stems [6]TheLJ2OOOserislVOboardheeon-bosrdsts@oheckiugPfi= 02684-60010 [7]NoIonge.ravaiiable. 1-15