4. On the right side of the product, remove two screws (callout 1). Figure 1-20 Remove the top-cover assembly (2 of 3) 1 5. On the top-cover assembly, remove three screws (callout 1). NOTE: The screw behind the control panel has a protective cover over it. Remove the cover to remove the screw, but keep the cover in order to reinstall it after installing the control panel. Figure 1-21 Remove the top-cover assembly (3 of 3) 1 6. Lift the top-cover assembly off of the product to remove it. ENWW Removal and replacement procedures 17