4. Remove four screws (callout 1), and then remove the laser scanner assembly. Figure 1-34 Remove the laser scanner assembly (2 of 2) 1 Registration assembly 1. Remove the following components: ● Tray 2 cassette ● Left cover. See Left cover on page 13 . ● Scanner assembly. See Scanner assembly on page 13 . ● Control panel. See Control panel on page 15 . ● Right cover. See Right cover on page 17 . ● Rear cover, rear door, and feed assembly. See Rear cover, rear door, and feed assembly on page 20 . ● Top cover assembly. See Top cover on page 18 . 2. Open the toner cartridge door and the rear jam access door. 26 Chapter 1 Removal and replacement ENWW