5. Remove two screws (callout 1), unroute the cables from the guides (callout 2), and then remove the fan cable guide. Figure 1-45 Remove the duplex drive assembly (3 of 4) 1 2 6. Remove three screws (callout 1), and then pull the drive assembly (callout 2) away from the product. Figure 1-46 Remove the duplex drive assembly (4 of 4) 1 2 CAUTION: Some of the gears and the solenoid arm are not captive. Do not lose the gears or the arm when you remove the assembly. ENWW Removal and replacement procedures 33