Required tools ● Number 2 Phillips screwdriver with a magnetic tip and a 152-mm (6-inch) shaft length ● Precision slotted (flat head) screwdriver with a 1 mm (0.04 in) blade width NOTE: This fine-point tool is required to release the front door pins. The width of the blade must be 2 mm (0.08 in) or less to be able to drive the door pins out of the mounting holes. ● Small, slotted (flat head) screwdriver ● Needle-nose pliers ● Snap-ring pliers ● ESD mat (if one is available) ● Penlight (optional) CAUTION: Always use a Phillips screwdriver (callout 1). Do not use a pozidrive screwdriver (callout 2) or any motorized screwdriver. These can damage screws or screw threads.
Figure 1-1 Phillips and pozidrive screwdriver comparison ENWW Removal and replacement strategy 3