2. Remove four screws (callout 1), the scanner cover (callout 2) and the sheet-metal plate (callout 3). NOTE: The scanner cover and plate are removed as one assembly. TIP: When the cover is reinstalled, make sure that the black screws (callout 4) are installed in the correct screw holes. Figure 2-30 Remove the laser/scanner assembly (2 of 4) 4 1 2 3 3. Disconnect one FFC (callout 1), and then remove four screws (callout 2). Figure 2-31 Remove the laser/scanner assembly (3 of 4) 2 1 ENWW Main assemblies 59