Small parts (End User Replaceable) The I/R lens, expansion door, I/O door, Rubber feet, memory doors, and PCMCIA door are all replaceable. The I/R lens snaps in and out from the inside of the I/O door. To remove the I/O door, open it fully. Flex the door so that the center hinge separates from the backcase. Continue to flex until side pins clear holes in back case. To reassemble, simply reverse the procedure. The expansion door is removed by opening it fully and flexing it in the middle until the pins in the backcase disengage from the slots in the side of the door. To reassemble, reverse the procedure. The rubber feet are adhered to the bottom case with adhesive.
The PCMCIA door is remove in the same manner as the expansion door. ___________ 22