Using OmniBook Accessories Using the Floppy Drive Using the Floppy Drive You can install the floppy drive in the center drive bay or attach it externally to the parallel port. This section describes how to ♦ Install the floppy drive internally. ♦ Install the floppy drive externally. ♦ Insert and remove a floppy disk. To install the floppy drive internally 1. If necessary, remove the CD-ROM drive or super battery from the OmniBook. 2. Slide the floppy drive into the OmniBook until it clicks into place. Floppy disk drive 1-9