Table 1: FRM (Field Replaceable Module) List Part No. CQ114-90035 Rev B HP Scitex FB500 / FB700 Service Manual Page 25 of 510 Part # Part Name Type Description Page CQ114-67158 FRM,FB500- R2R,MEDIA COLLET ASSY, _ _ U R2R This is a single media collet used on the media spools in the roll-to- roll accessory. The collet is for 3" cardboard cores only. Two col- lets are used per spool; this FRM is for qty 1. Common to 500-700. page 336 CQ114-67159 FRM,FB500- R2R,SPOOL HOLDER ASS _ _ Y,U R2R This is the spool-holding "puck" with roller bearings found on the roll-to-roll accessory. It holds the media spool in place between the user-end and service-end bracket assemblies.
Four are used in total on the accessory; this FRM is for qty. 1 page 336 CQ114-67160 FRM,FB500- R2R,SUPPLY TENSIONER _ _ ASSY,U R2R This is the supply tensioner ("clutch") used in the service-end supply bracket of the roll-to-roll accessory. The supply tensioner prevents the media supply roll from unspooling. Common to 500-700. page 336 CQ114-67161 FRM,R2R,ALIGNMENT TO _ OL,U R2R This is the alignment tool used with the roll-to-roll accessory to posi- tion the brackets/rollers accurately. Common to 500-700.
page 336 CQ114-67162 FRM,CAR ENCODR/ _ BRKT,U Carr This is the main carriage-drive encoder sensor that mounts on the input-side of the carriage (with integrated cable), Includes mount- ing bracket and associated hardware. Common to 500-700. page 240 CQ114-67163 FRM,EXHAUST FAN LIGH _ _ T BLOCKER,U _ Encl This is the light-blocking shield for each of the enclosure fans except for the service endcap location. Located inside the respec- tive enclosure. Multiple instances are used per printer; this FRM is for qty. 1. Common to 500-700. See CQ114-67185 for the special shield used only in the service endcap.
CQ114-67164 FRM,EXHAUST FAN CABL _ _ E,CENTER DOOR,U _ Elec This cable runs inside the main output-side door and provides power to the three enclosure fans in the cover. It connects to a cable that comes from J7 of the I/O board. Common to 500-700. page 383 CQ114-67167 FRM,SERV STN,WIPER,U _ Maint This is the service station wiper blade. Ordinarily this part is replaced by the customer during scheduled cleaning & mainte- nance via the User Cleaning Kit CQ121A (consumable item). It is included here for unscheduled service replacement. Common to 500-700.
page 164 CQ114-67168 FRM,SERV STN,DRAIN FIT _ _ TING KIT,U _ Maint This is the kit of the elbow on the service station basin, the spigot on the printer frame, and associated hardware. Does not include the hose between the basin and the spigot, see CQ114-67085. Common to 500-700. page 394 CQ114-67169 FRM,USER SIDE LOUVER, _ _ U Encl This is the light-trapping louvre assembly found in the light-blocking tray on the user end of the printer. Common to 500-700. CQ114-67170 FRM,RENISHAW CONNE _ CTOR/INTERFACE,U Med Drv The is the interface connector for the hi-resolution read-head. The connector has illuminated LEDs when operating. The read-head/ cable inserts into this connector.
This connector itself plugs into CQ114-67179. Common to 500-700. page 276 CQ114-67171 FRM,R2R,TAKEUP BELT CV _ _ R,U R2R This is the sheet metal cap that covers the belt & gears/pulleys in the roll-to-roll accessory takeup motor area. Common to 500-700. page 334 CQ114-67172 FRM,R2R,MOTOR BELT,U _ R2R This is the drive belt located between the takeup motor and the takeup-spool shaft on the roll-to-roll accessory. Common to 500- 700. page 336 CQ114-67173 FRM,R2R,DANCER BAR,L _ OCK,BRKT,U R2R This is the small bracket that locks the dancer bar on the roll-to-roll accessory into its high position. Common to 500-700.
page 336 CQ114-67174 SERV TOOL,MEDIA MTR _ _ _ TORQUE WRENCH,U _ Tool This torque wrench with long 5mm hex key bit is used to remove/ install the media drive motor-roller coupler (CQ114-67065). This tool is mandatory for performing that service. page 284