1.2 General Inspection 1. Inspect the shipping container for damage Keep the damaged shipping container or cushioning material until the contents of the shipment have been checked for completeness and the instrument has passed both electrical and mechanical tests. 2. Inspect the instrument 3. Check the accessories In case of any damage, or defect, or failure, notify the Hantek representative. Please check the accessories according to the packing lists. If the accessories are incomplete or damaged, please contact the Hantek representative. 1.3 To Prepare for Use This chapter introduces the basic process to help you fast start to use the instrument. Prepare the instrument. 1.
To Connect to Power Please use the power cord provided with the accessories to connect the spectrum analyzer to AC power source. Press the power switch on lower left of front pannel to turn on the instrument. 2. Power-on Inspection After connecting the instrument to power source correctly, press at the front panel to start the spectrum analyzer. Following the start-up screen which shows the start-up initialization process information, the sweep curve is displayed.