HT2018B(C) Battery System Tester manual EN V1.2 (EN)

Content 1 Brief Introduction ...................................................................................................... 1 2 Safety Requirements ................................................................................................ 1 3 International electrical symbols ................................................................................ 2 4 Product icons and instructions ................................................................................. 2 5 Functions..................................................................................................................

4 5.1 Battery voltage type ....................................................................................... 4 5.2 Battery Test .................................................................................................... 4 5.3 Startup Load Test .......................................................................................... 8 5.4 Maximum Load Test ...................................................................................... 9 5.5 Charging System Test ................................................................................. 11 5.6 Print Test Report ..........................................................................................

12 5.7 Language ..................................................................................................... 13 6 The common problems .......................................................................................... 14 7 Specifications ......................................................................................................... 16 8 Battery Specification Table .................................................................................... 17 8.1 JIS code conversion table ............................................................................ 17 8.2 DIN/EN model comparison table ..................................................................

18 HT2018B(C) Battery System Tester I

Стр. 2

2 Safety Requirements

1 Brief Introduction HT2018B/C Series Battery System Tester is a performance testing tool for startup lead- acid batteries. It is a testing tool for measuring the startup process, charging process and battery performance during electric load process. HT2018C has the Bluetooth printing function for startup process test report. This product can be used for battery production and sales, auto parts maintenance and various equipment systems related to the use of lead-acid batteries on the performance of lead-acid batteries testing tools. Features: ◆ The instrument is excellent in design, easy to operate, accurate in reading and complete in functions.

◆ The instrument adopts large screen dot matrix liquid crystal display. ◆ The internal use of accurate circuits and powerful digital processing unit, using four- wire Kelvin test connection method to complete a series of complex data acquisition and operation, and obtain each test data. ◆ The instrument strengthens the protection of input signal line against mistake and input characteristic, so as to prevent polarity reversal, prevent high voltage connection and bad contact of test clamp head, in order to use in the process of safer and more convenient. 2 Safety Requirements This manual includes the use of instrument instructions and safety operation warnings and how to maintain them.

Using instruments without manuals may damage the instrument. This instrument is designed and manufactured strictly according to the safety requirements of GB4793.1 electronic measuring instrument and IEC/EN61010-1 safety standard. It meets the double insulation overvoltage standard CAT III 600V and pollution level 2 safety standard design.

1) HT2018B/C is suitable for detecting 6V, 12V and 24V batteries; 2) The working voltage range of HT2018B/C is DC 4.5V ~30V; 3) Battery voltage will be slightly higher than the normal value at just full state, please turn on the headlamp for 2-3 minutes, and when the voltage drops back to the normal value, now measure again; 4) Check the test fixture before use. The insulation layer is intact, no breakage, nudity and disconnection.

It is forbidden to use the front cover before it is covered, otherwise it will be in danger of electric shock; 5) Don’t use and store instruments in high temperature, high humidity, inflammable, explosive and strong electromagnetic fields; 6) Please do not change the instrument's internal circuit at random, so as not to damage the instrument and safety; 7) Wear a qualified eye patch when testing or repairing cars to prevent the engine from carrying foreign matter into the eyes; HT2018B(C) Battery System Tester 1

Стр. 3

4 Product icons and instructions

8) Please operate and repair vehicles in a well ventilated environment to prevent inhalation of toxic gases; 9) If the car engine is running, do not put the instruments and accessories beside the engine or exhaust pipe to avoid high temperature damage; 10) Pay attention to car manufacturers' warnings and precautions and maintenance procedures when repairing automobiles; 11) Selectable battery standards: Exact test CCA ： 100~1700 IEC ： 100~1000 EN ： 100~1700 DIN ： 100~1000 JIS ： Need to check the table CCA Quick test 3AH~250AH 3 International electrical symbols 4 Product icons and instructions Function keys and test forceps: > >: Recurring, decreasing, up and down page keys; :

Cancel, return key; : Confirm, enter and test key. Intermediate key: Enter the printing interface; Red test clamp: Positive connection test clamp; HT2018B(C) Battery System Tester 2 DC AC DC/AC Warning caution safety sign Dangerous voltage (danger of electric shock) GND Double insulated and highly insulated Fuse Battery

Стр. 4

4 Product icons and instructions

Black test clamp: Negative connection test clamp. HT2018B(C) Battery System Tester 3

Стр. 5