‹ Digital Operator Display (optional) The key names and functions of the Digital Operator are described below Drive Mode Indicators FWD: Lights up when a forward run command is input. REV: Lights up when a reverse run command is input. SEQ: Lights up when the run command from the control circuit terminal is enabled. REF: Lights up when the frequency reference from control circuit terminals A1 and A2 is enabled. ALARM: Lights up when an error or alarm has occurred. Data Display Displays monitor data, parameter numbers, and set- tings. Mode Display DRIVE: Lights up in Drive Mode. QUICK: Lights up in Quick Programming Mode. ADV: Lights up in Advanced Programming Mode. VERIFY:
Lights up in Verify Mode. A. TUNE: Lights up in Autotuning Mode. Keys Execute operations such as setting user parameters, monitoring, jogging, and autotuning. „ Digital Operator Keys EN-14 Key Name Function LOCAL/REMOTE Key Switches between operation via the Digital Operator (LOCAL) and the settings in b1-01 and b1-02 (REMOTE). This key can be enabled or disabled by setting parameter o2-01. MENU Key Selects the modes. ESC Key Returns to the status before the DATA/ENTER Key was pressed. JOG Key Enables jog operation when the Inverter is being operated from the Digital Operator.
FWD/REV Key Selects the rotation direction of the motor when the Inverter is being operated from the Digital Operator. Shift/RESET Key Sets the active digit when programming user parameters. Also acts as the Reset key when a fault has occurred. Increment Key Selects user parameter numbers and increments parameter set- tings. Used to move to the next item or data. Decrement Key Selects user parameter numbers and decrements parameter set- tings. Used to move to the previous item or data. DATA/ENTER Key Enters menus and parameters and validates parameter settings. RUN Key Starts operation when the Inverter is being controlled by the Digital Operator (LOCAL Mode).
STOP Key Stops Inverter operation (LOCAL and REMOTE Mode). This key can be enabled or disabled when operating from a source