Laser/scanner assembly WARNING! Never operate or service the printer with the protective cover removed from the laser/scanner assembly. The reflected beam, although invisible, can damage your eyes. 1 Remove the left side cover (see “Left side cover” on page 81). 2 Remove the back cover (see “Back cover” on page 82). 3 Remove the right side cover (see “Right side cover” on page 84). 4 Remove the top cover (see “Top cover” on page 87). 5 Disconnect the flat flexible cable from its socket (callout 1) on the laser/scanner. 6 Disconnect the cable connector (callout 2) from the formatter. 1 2 Figure 44. Removing the laser/scanner (1 of 2) ENWW Internal assemblies 101