Front cover assembly The front cover assembly is composed of three pieces: z front cover (the frame that surrounds the main input tray) z print cartridge door z front guide assembly (the internal shelf that attaches the front cover and the print cartridge door to the printer) Front cover 1 Remove the left side cover (see “Left side cover” on page 81). 2 Remove the back cover (see “Back cover” on page 82). 3 Remove the right side cover (see “Right side cover” on page 84). 4 Remove the top cover (see “Top cover” on page 87). 5 Close the print cartridge door. 6 Loosen two screws (one shown, callout 1), one on each side of the cover. 1 Figure 32. Removing the front cover (1 of 2) ENWW Covers 89